Atlas® Fast Clamp Three Point 13"-24" Non-Runout Wheel Clamps (Set Of 4)

Fast-Clamps fasten to the wheel by “gripping the tire”.

$2,995.00

Atlas® Edge Trailer Alignment Fixture for 801 Alignment Machine

The Atlas® Edge Trailer Alignment Fixture attaches to the "5th Wheel" of standard truck trailers and provides mounting points for the 801 Alignment Machine sensors.

$2,065.00

Atlas® Alignment Calibration Bar (801)

The Atlas® calibration fixture system allows the owner of an Atlas® Edge 801 computer alignment machine to perform sensor calibration procedures in his shop.

$1,980.00

Atlas® Heavy Duty Truck Turntables (Pair)

Atlas® Heavy Duty Truck Turntables (Pair)

$1,760.00

Atlas® Wheel Stands and Alignment Turntable Package

Includes 4 Steel Wheel Stands and 4 Alignment Turntables

$1,495.00

Atlas® Alignment Kit

The Atlas® alignment kit transforms a four post lift into a fully functional alignment lift at a fraction of the cost of other alignment lifts.

$1,395.00

Atlas® Alignment Slip Plate Kit

The Atlas® Alignment Slip Plate Kit includes a set of heavy duty ball bearing slip plates with the necessary set of on/off approach ramps, turntable ramps, and stop plates.

$1,095.00

Atlas® Wheel Stands

Set of 4 Atlas® Wheel Stands.

$995.00

Atlas® Alignment Calibration Bar
(301, 401 and 601)

The Atlas® calibration fixture system allows the owner of an Atlas® Edge 301, Atlas® Edge 401, or Atlas® Edge 601 computer alignment machine to perform sensor calibration procedures in his shop.

$699.00

Atlas® Alignment Calibration Bar
(101 and 201)

The Atlas® calibration fixture system allows the owner of an Atlas® Edge 101 or Atlas® Edge 201 computer alignment machine to perform sensor calibration procedures in his shop.

$499.00

Atlas® Scissor Lift Support Bars

The Atlas® Support Bar System is designed for use with scissor lift platforms when lifting heavier vehicles (pickup trucks and SUVs) with narrow frames.

$350.00

Atlas® Turntables (Pair)

Atlas® Turntables (Pair)

$345.00

Atlas® Alignment Turntables (Pair)

Atlas® Alignment Turntables (Pair)

$345.00

Atlas® EDGE 3-Point FastClamp 30" Extension Kit

Extends the diameter of the Atlas® EDGE FastClamp Wheel Clamps from 24" to 30"

$335.00

Atlas® Edge Dually Extension Pin for 401 & 601

Atlas® Edge Dually Extension Pin for 401 & 601 Alignment Machines (1 Piece)

6 total are needed for the Atlas® 3 Point Fast Clamps.
8 total are needed for the traditional 4 point clamps.

$26.00

Atlas® Fast Clamp ABS Tip For Lip-Less Wheels (1 PC)

Atlas® Fast Clamp ABS Tip For Lip-Less Wheels (1 PC)

$13.00