Photo Gallery

Product Video

Related Products

Atlas SLP-7K Full Rise Scissor Lift
Product Code ATTD-SLP7K

The Atlas SLP7K full rise scissor lift combines an extremely low lift platform height and a 74 inch full rise scissor jack system.

 

$3,495.00

Add to Cart

  • 7,000 LB. capacity
  • 74" (6' 2") maximum lifting height
  • Adjustable width
  • 10 air actuated locking positions
  • 220V single phase motor
  • Open middle for easy access
  • Zerk grease fittings at each hinge point
  • Locking approach ramps
  • Separate Self-Contained Control Panel
  • Greg Smith Equipment has added another space saving scissor lift to the Atlas product line. The Atlas SLP7K full rise scissor lift combines an extremely low lift platform height and a 74 inch full rise scissor jack system. The Atlas full rise scissor lift is the perfect above ground lift for those customers with ceiling height restrictions. The Atlas full rise scissor lift is also perfect for those service shops that want to avoid the cluttered look of dozens of vertical lift columns.

    The distance between the lift platforms of the Atlas SLP 7K scissor lift can be adjusted to accommodate a full frame, uni-body, or SUV (truck) lifting points.

    The separate control panel may be conveniently positioned to allow easy access for the operator. The 220 volt (single phase) electric/hydraulic power unit is housed inside the metal control panel box. The push button controls activate the raising and lowering of the lift...and the sophisticated 10 position air actuated lock system is automatically engaged and disengaged as the lift is being raised or lowered.

    Each hinge point has a zerk grease fitting to allow maximum lubrication to each joint. The UHMP wear blocks ensure years of smooth operation of the lifting surface.

    The control panel has two DOWN buttons. Once the lift platforms are lowered to within 10 ½ inches of the ground, the lift stops its descent. The second lift button needs to be depressed (which emits an alarm noise and a red alarm light flashes) to allow the lift to go completely to the ground.

    The Atlas SLP 7K has locking approach ramps (attached to the lifting platforms) that can be locked into a horizontal position after the lift is locked at the desired working height.

    The Atlas SLP 7K takes up far less space than an above ground lift and is much easier to install than an in ground lift.

    Atlas SLP7K Full Rise Scissor Lift Specifications

    Lifting Capacity 7,000 lbs.
    Max Lifting Height 74" (6' 2")
    Overall Length 78 "
    Max Overall Width 78 ½"
    Lift Platform 56 ¼" x 23 ½"
    Lowered Height 4 3/8"
    Width Between Platforms Adjustable up to 31"
    Approach Ramps 10 1/4" x 21 3/8"
    Power Unit 220 volt / Single Phase
    Locking Positions 10
    Locks Actuated Air
    Lifting Cylinders 4 (2 In Each Platform)
    Shipping Weight 2,300 lbs.

    Size: Pages:  
     
    Atlas SLP-7K Manual 530 KB 30 Download