Atlas® SP6000 Single Post Specialty Lift
Product Code TP-XL-SP6000

Related Products


  • 6,000 lb. capacity can handle most vehicles and light trucks
  • Low profile approach ramps for vehicles with low ground clearance
  • Lift can be installed to lift from left or right side
  • Minimal footprint allows for multiple installations
  • Low post height allows for low ceiling residential installations
  • Commercial grade hydraulic cylinder and heavy-duty leaf chain
  • 19 locking positions
  • Reliable DURO electric/hydraulic cylinder
  • Shipping Weight: 2,415 LBS.
  • The Atlas® SP6000 is the perfect full rise lift for those customers (with minimum floor space) who want to store two vehicles in the same floor space as one vehicle would occupy. The Atlas® SP6000 single post lift can be used to raise and store your car or light truck to over 6 feet in the air, freeing up extra garage floor space.

    The 110 ¼ inch column fits easily under a 10 foot (120 inch) ceiling, and the open center between the runways allows the operator to have access to many parts of the vehicle that are not accessible with a mid-rise lift.

    The fixed runways are much easier to "drive-on". You do not need to move arms to the correct position under the vehicle. The runways are wide enough to accommodate most cars and light SUVs/trucks.

    The Atlas® SP6000 single post lift operates on 110 volt electricity.

    The Atlas® SP6000 has a lifting capacity of 6,000 pounds and can handle most cars and light trucks. The ramps fully support the wheels of the vehicle so that the vehicle’s suspension system is always in a "resting" position at any height.

    If you need a space saving single post lift that can raise your car high enough to allow you to walk under the vehicle for an oil change, or provide enough clearance to store one vehicle under another, then the Atlas® SP6000 is your perfect choice.

    If a four post lift is just TOO BIG for your garage, please consider the Atlas® SP6000 to solve your storage problems.

    Click here to see what other customers think about the Atlas® SP6000!

    Additional Information

    Atlas® SP6000 Specifications
    Capacity 6,000 LB.
    Overall Height 110 1/4" (9' 2 1/4")
    Overall Width (Without Motor) 105" (8' 9")
    Overall Width (With Motor) 112 3/16" (9' 4 3/16")
    Overall Length 176" (14' 8")
    Column Size 13" x 10 3/4"
    Runway Length (Without Ramps) 152" (12' 8")
    Runway Width (Overall) 18 7/8"
    Runway Width (Drivable) 15 3/4"
    Outside Runway To Outside Runway 80 5/16" (6' 8 5/16")
    Between Runways 42 1/2" (3' 6 1/2")
    Approach Ramp Length 18 7/8"
    Clearance Under Runways 77 3/16" (6' 5 3/16")
    Lifting Height (To Top Of Runways) 80 7/16" (6' 8 7/16")
    Overall Base 39 ¼" x 55"
    Base Height 3 ¼"
    Runway Thickness 3 1/8"
    Runway Guides 3 1/8" H x 1 1/2" W
    Locking Positions 19
    Power Unit 110V
    Shipping Weight 2,415 LBS.
    Manuals/Assembly Guides
      Size: Pages:  
    Atlas® SP6000 Manual 475 KB 16 Download

    5" Bench Vise