COMBO - TC221 + WB11
Product Code COMBO-TC221+WB11

Related Products


Atlas® TC221 Tire Changer
  • Tire inflator (no bead blaster)
  • 3 positions for clamping jaws
  • 90-110 PSI
  • 110V
  • Inner Clamp: 11 5/8” – 25 1/4”
  • Outer Clamp: 9 3/4”- 23 1/4”
  • Max Tire Diameter: 39”
  • Max Wheel Width: 13”
  • The Atlas® TC 221 wheel clamp tire changer is the perfect changer for a small commercial garage or an ATV/motorcycle dealer.

    The Atlas® wheel clamp tire changers are designed to change the tires on both high priced alloy wheels and steel wheels without damaging the rim or the tire. The powerful bead breaker located on the side of the tire changer is designed to break even the most stubborn and rusted beads without damage to the rim. The turntable jaws (which can be covered with the standard protective plastic inserts) hold the rim securely without damaging the surface of the rim. These jaws can be moved to three different positions along the slides of the turntable to either increase or decrease the clamping range of the Atlas® 221.

    The Atlas® TC 221 comes standard with an inflator hose and gauge.

    There is some assembly required on the Atlas® TC 221 wheel clamp tire changer.


    Additional Information

    Atlas® WB11 Wheel Balancer
  • Automatic positioning where to apply weights.
  • Automatic and pedal operated brake.
  • Automatic start/stop when hood is lowered/raised.
  • Static and dynamic balancing modes.
  • Rapid optimization (OPT)
  • Self-diagnosis
  • Self-calibration
  • Exceptional stability in reading the unbalance between planes.
  • Display in grams or ounces, in mm or inches.
  • No anchor-down installation needed.
  • The Atlas® WB-11 is the most popular Atlas® wheel balancer that we sell. Low price, dependability and repeatable accuracy make the Atlas® WB-11 one of the most popular models of the entire Atlas® line of computer wheel balancers.The Atlas® WB-11 is very a simple, yet sophisticated wheel balancer. Each electrical component part is virtually "plug and play" so repair is easy when it is time to replace parts.

    The Atlas® WB-11 is capable of self-diagnosing problems and displays error codes so the operator can make the necessary adjustments or repairs in his own shop. There is no need to wait for the high priced service technician to visit your store. The simplicity of the Atlas® WB-11, both in ease of use and ease of repair, make this balancer the perfect choice for your shop. The Atlas® WB-11 wheel balancer handles wheels that weigh up to 130 LB.


    Additional Information

    Atlas® TC221 Specifications Detailed Pictures/Specs.
    Rims Steel, Aluminum, Alloy
    External Locking Rim Dimension 9 3/4" - 21 5/8"
    10 3/4" - 22 1/2"
    11 5/8" - 23 1/4"
    Internal Locking Rim Dimension 11 5/8" - 23 1/4"
    12 5/8" - 24 1/4"
    13 1/2" - 25 1/4"
    External Locking Rim Dimension
    (With Flip Adapters In The ATV Configuration)
    Position 1) 2 7/8" - 14 3/4"
    Position 2) 3 3/4" - 15 5/8"
    Position 3) 4 5/8" - 16 5/8"
    External Locking Rim Dimension
    (With Flip Adapters In The Motorcycle Configuration)
    Position 1) 12 5/8" - 24 1/2"
    Position 2) 13 5/8" - 25 1/2"
    Position 3) 14 1/2" - 26 3/8"
    Maximum tire diameter 39"
    Operating voltage 110V 1Ph
    Maximum wheel width (Bead Breaker) 13"
    Air pressure 90 - 110 psi
    Maximum Inlet Pressure not to exceed 140 PSI*
    Shipping weight 500 LB.
    Table motor 1 HP
    Turntable Rotating Torque 885 ft/lbs.
    Wheel clamping 4 jaws: internal/external
    Bead breaker Pneumatic, 5,500 LB. force
    Oiler, filter, regulator Included
    Soap reservoir Included
    Warranty 1 yr. limited
    4 Black plastic rim protectors Included

    *Inlet pressure is the amount of air pressure that your air compressor is supplying.

    Atlas® WB11 Wheel Balancer Specifications

    Max Tire Diameter 39"
    Rim Sizes (cars and light trucks) 10"-32"
    Rim Width 1 ½"-20"
    Shaft Size 40mm
    Max. Wheel Weight 150 LBS.
    Balancing Speed 150 R.P.M
    Automatic Data Entry NO
    Truck Adapter Set Optional
    Warranty 1 year limited
    Shipping Weight 355 LBS.
    Power Supply 110V 1Ph
    Motor ¼ HP
    Display Standard or Metric
    Accuracy 1 g
    Weight Position Resolution 1.4 Degrees
    Self Calibration YES
    Atlas® TC221 Tire Changer
      Size: Pages:  
    Atlas® TC221 Manual 3.8 MB 51 Download
    Atlas® TC221 Assembly Guide 617 KB 5 Download
    Atlas® TC221 Parts List 808 KB 28 Download
    Filling And Adjustment Of The Filter Regulator Lubricator 240 KB 6 Download

    Atlas® WB11 Wheel Balancer
      Size: Pages:  
    Atlas® WB11 Manual 1 MB 22 Download
    Atlas® WB11 Quick Start Guide 525 KB 8 Download
    Atlas® WB11 Parts List 377 KB 20 Download
    Tire Changers:
    A Guide To Using A Wheel Clamp Tire Changer
    Learn what makes Atlas wheel clamp tire changers superior to other wheel clamp tire changers
    made in China.
    A Guide To Using A Wheel Clamp Tire Changer
    Learn how to break the bead, and demount and mount a tire on a wheel clamp tire changer.
    How Does A Bead Blaster Work, And Do I Need One?
    Click here to see for an explanation of bead blasters, and if you need one.
    Hub Centric vs. Lug Centric wheels?
    Greg Smith Equipment has a well staffed service department that is augmented by a huge
    parts department.

    Wheel Balancers:
    What Makes Atlas Wheel Balancers Superior To Other Wheel Balancers Made in China?
    Learn what makes the Atlas computer spin wheel balancers so superior to the other off the
    car computer spin balancers made in China.
    Hub Centric vs. Lug Centric wheels?
    What is the difference between
    Hub Centric Wheels and Lug Centric Wheels?
    Hub Centric vs. Lug Centric wheels?
    Battery backup products with surge protection capabilities should always be used with your
    Atlas wheel balancer.
    Hub Centric vs. Lug Centric wheels?
    Greg Smith Equipment has a well staffed service department that is augmented by a huge
    parts department.