Pro Cycle is made by Direct Lift. It is produced to strict industry standards and meets or exceeds the quality of other comparable lifts. All Direct lifts are manufactured in an ISO 9001 certified factory. The lift is powder coated black and the table is diamond plate steel for increased traction and durability.

Pro Cycle XLT is made by Direct-Lift. It is produced to strict industry standards and meets or exceeds the quality of other comparable lifts. All Direct lifts are manufactured in an ISO 9001 certified factory. The lift is powder-coated black and the table is diamond plate steel. Pro Cycle XLT is easily moved on the built-in rollers and wheel dolly. It fits comfortably into the bed of a standard pickup truck.

The Pro Cycle DT is essentially the same lift as the Pro Cycle lift, except the Pro Cycle DT ("Drop Tail") has a 19" removable section built into the rear of the lift. The 19 1/2" drop tail section can be easily removed to make wheel service much easier. Other than the removable section, the Pro Cycle and Pro Cycle DT are the same lift. Both lifts are 93" long, 24" wide, air operated, and come with a free wheel vise. Both lifts also come with a 20" removable approach ramp.

The Pro Cycle DT and Pro Cycle XLT DT are the same as their standard bike lift counterparts (the Pro Cycle and Pro Cycle XLT, respectively), except the “DT” aka “Drop Tail” has been added. Our Pro Cycle DT lifts have a 19 ½” section that can be easily removed to make wheel service much easier.

The Atlas HI-RISE 1500 is a motorcycle & ATV lift. This lift is air operated. The Atlas HI-RISE 1500 will come with the wheel vise, two side extensions, the chopper extension, and the approach ramps. This lift has a maximum lifting height of 43", which is about 10" higher than most other motorcycle lifts on the market.

Greg Smith Equipment is proud to introduce the new Atlas Motorcycle Carrier. A strong design and easy to use ramp system make this motorcycle carrier perfect for transporting your motorcycle, sport bike, or scooter. The Atlas MC carrier is lightweight, making it easy to install and easy to breakdown for storage. This hauler will work with most standard hitch receivers.

The Black Jack 1000 is a lightweight scissor jack that fits nicely under most motorcycle and ATV frames. The Black Jack 1000 works well with any elevated motorcycle lift or works well just operating from floor level.

The Pro Cycle CE is a 13" extension that will fit any of our Pro Cycle lifts, including the Pro Cycle, Pro Cycle XLT, Pro Cycle DT, and Pro Cycle XLT DT.

The Pro Cycle XLT kit will fit both our Pro Cycle and Pro Cycle DT bike lifts. The Pro Cycle XLT kit includes two 12" side extensions, a two wheeled dolly, approach ramp extensions, three connector rods and clips. In less than two minutes, you can convert a standard Pro Cycle motorcycle lift into an ATV lift.

The ATLAS Motocross Lift HT1007 is a lightweight, portable lift that comes in several different colors. This lift is ideal for anyone looking for an inexpensive way to get their bike off the floor. The lightweight and compact design also allows you to take this lift with you on the road.