The Atlas BP9000 is a base-plate two-post lift designed for low ceiling garages. The total column height of 111" (9 feet 3 inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.

Greg Smith Equipment is proud to announce the arrival of the newest in our Atlas series of quality lifts: The Atlas Garage Pro 8,000 LB. capacity 4 post storage/service Lift.

Greg Smith Equipment believes that the Atlas brand above ground auto lift offers a competitive priced above ground auto lift that offers more features and benefits than the ever increasing number of "Chinese" auto lifts sold by no-name Internet marketers.

Our super symmetric arm configuration is a great improvement over the traditional asymmetric or symmetric arm configuration.

Our most asked question about our arm configuration is:
"Can I get in and out of the vehicle easily"? The Atlas OH 9000 super symmetric arm configuration allows the customer to get in and out of the vehicle with ease.

The real question should be; "Can I position the arms properly (arm pads under the correct lift points) and still get in and out of the vehicle easily"? The Atlas OH 9000 answers "YES" to this question.

Greg Smith Equipment is proud to announce the arrival of the new Direct Lift PP-8S (Standard) four post hobbyist lift. The new Direct Lift PP-8S now carries an Industry tested lifting capacity of 8,000 lbs. This new rating of 8,000 lbs. is a direct result of three months of extensive testing.

Greg Smith Equipment is proud to announce the arrival of the new Atlas Garage Pro XLT 8,000 lb. Deluxe Series XLT Storage Lift four post hobbyist lift.

Greg Smith Equipment introduces the Atlas above ground auto lifts to offer an excellent above ground auto lift at a price to compete with the ever increasing number of internet marketers selling NO-NAME above ground auto lifts.

The Atlas OH9000H is the taller version of the Atlas OH9000 two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas OH9000. The taller position of the over head beam allows the Atlas OH9000H above ground hoist to lift “taller vehicles”.

The Atlas OH9000W is the wider version of the Atlas OH9000 two post above ground lift. The Atlas OH9000W above ground hoist is 6 inches wider than the Atlas OH9000, giving it an overall width of 138 ¾” (11’ 6 ¾”) and a drive thru width of 102 ¾” (8’ 6 ¾”). The extra width of the Atlas OH9000W two post above ground hoist allows extra wide vehicles and extra wide trailers to be pulled through.

Greg Smith Equipment is proud to introduce the newest Direct Lift four post lift: The Pro Park 8 Plus. This is a true 8,000 LB. four post lift. The Direct Lift Pro Park 8 Plus incorporates many of the great features of both Direct Lift Pro Park 8S and the Direct Lift Pro Park 9 Plus.

With a dry weight of about 2,200 lbs., the Pro Park 9 Plus is perhaps the most heavy duty portable lift on the market. The Pro Park 9 Plus comes with a free set of polyurethane casters, 3 drip trays, and a jack tray. Designed with a runway length of 15' 6" and "drive-under" clearance of 6' 8" , the Pro Park 9 Plus will allow most trucks to be stored on both the top and bottom of this lift.

The Direct Lift Pro 9F is a commercial grade two post lift. With an overall column height of 9’3”, the Pro 9F is an ideal choice for the repair shop with a low ceiling clearance. The Direct Lift Pro 9F comes with a FREE set of truck adapters and mounting hardware. It operates off of a 220 Volt, single phase power unit.

The Atlas NINE is one of our most popular lifts and comes with a free set of truck adapters and mounting hardware. The Atlas NINE is a commercial grade lift and operates off of 220 Volt, single phase motor. In order to install this lift, you will need approximately 12 foot ceilings and 4" of concrete (with a minimum of 3,000 psi).

The Master Series XL-11D is a heavy duty 11,000 LB. capacity two post overhead above ground lift designed for years of service. The XL-11D features a single piece continuous column and dual cylinder direct drive lifting system. Combined, these two features provide added strength and durability so that the XL-11D will have a long service life.

The Master Series XL-11C is the perfect choice for those customers who demand the most amount of “true” lifting capacities at the lowest possible price.

The ATLAS 14,000 lb. lift is built for years of service. This lift utilizes top quality aircraft cable and a hydraulic cylinder (located underneath a runway) to provide the smoothest and safest method of lifting large vehicles.

Greg Smith Equipment is proud to introduce the Atlas OH-10X two post commercial grade above ground lift. This commercial grade two post lift is the perfect choice for those large commercial repair facilities or The Mr. Homeowner who demands the highest quality at the absolute best price.

The Master Series TP10KAC-D is a heavy duty 10,000 LB. capacity two post overhead above ground lift designed for years of service. The TP10KAC-D features a single piece continuous column and dual cylinder direct drive lifting system. Combined, these two features provide added strength and durability so that the TP10KAC-D will have a long service life.

Greg Smith Equipment is pleased to announce the newly designed and improved commercial grade Atlas PV-10P two post lift. The commercial grade Atlas PV-10P two post lift offers the same extraordinary versatile lifting capacity of the Atlas PV-10, but also includes some modifications and improvements that make our Atlas PV-10P one of the most popular above ground lifts in the world.

The Atlas PV-10HP is the taller version of the Atlas PV-10P two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas PV-10P. The taller position of the over head beam allows the Atlas PV-10HP above ground hoist to lift “taller vehicles”.

Greg Smith Equipment is pleased to introduce a newly designed cylinder configuration for the Atlas PV-10 lift.

The Atlas PV-10H is the taller version of the Atlas PV-10 two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas PV-10. The taller position of the over head beam allows the Atlas PV-10H above ground hoist to lift “taller vehicles”.

The Master Series XL-12 is a heavy duty 12,000 LB. capacity two post base plate above ground lift designed for years of service. The XL-12 features an immense column base footprint to provide stability when lifting heavy trucks.

MAHA's MCL-16 Heavy Duty Mobile Column Lift, is available in configurations of 4 columns with a total combined lifting capacity as high as 64,000-pounds. No other mobile lifting system matches the MCL-16 for safety, durability, flexibility, and ease-of-operation. Whether you need to lift a bus, fleet vehicle, or fire truck, there is an MCL-16 system designed to meet your needs.

The Atlas Pro 12 is a commercial grade two post lift. The extra height and width of this lift will allow you to handle some of the largest vehicles found on the road today. The Atlas Pro 12 comes with a free set of truck adapters and mounting hardware. In order to install this lift, you will need a minimum ceiling clearance of about 13'10", with a concrete depth of 6" (minimum 3,000 psi).

The Master Series XL-15 is a heavy duty 15,000 LB. capacity two post overhead above ground lift designed for years of service for heavy trucks. The XL-15 features an immense column base footprint to provide stability when lifting heavy trucks.