Sort by NameSort by Price

Wheel Balancer Accessories

Atlas® Universal Adapter (TRUCK)/PF-40000

$599.00

The Atlas® Universal Adapter (TRUCK)/PF-40000 is designed for truck wheels that have either a closed center or wheels that are made "without a true center" and classified as lug-centric.

Atlas® MC-XLT Kit

$400.00

The Atlas® MC-XLT adapter kit will allow your Atlas® (passenger and light truck) computer wheel balancer to balance a variety of motorcycle wheels with hub assemblies up to 13.75 inches wide*.

Atlas® Universal Adapter (40mm Shafts)

$399.00

Atlas® Universal Adapter (UA) is designed for wheels that have either a closed center or wheels that are made "without a true center" and classified as lug-centric.

Atlas® Pneumatic Portable Wheel Lift

$399.00

The Atlas® pneumatic portable wheel lift (AEZWL) is the perfect solution to prevent back injuries when lifting large wheel assemblies onto the shaft of a wheel balancer or on onto tire changer turntable.

Atlas® MC Kit

$300.00

The Atlas® MC adapter kit will allow your Atlas® (passenger and light truck) computer wheel balancer to balance a variety of motorcycle wheels with hub assemblies up to 9.25 inches wide.

Atlas® Truck Adapter Set (36mm Shafts)

$279.00

The Atlas® light truck adapter set is needed to properly mount wheels with larger than normal center holes.

Atlas® Spoke Support Adapter (SSA)

$249.00

Greg Smith Equipment offers the Atlas® spoke support adapter (SSA) for use with all Atlas® motorcycle wheel balancers.

Atlas® Truck Adapter Set (40mm Shafts)

$199.00

The Atlas® light truck adapter set is needed to properly mount wheels with larger than normal center holes.

Wheel Balancer Cone 4 (3.74" - 5.18")

$100.00

Wheel Balancer Cone 4 (3.74" - 5.18") Fits A 40mm Shaft

Atlas® Metal Wing Nut (40mm)

$99.00

Atlas® Metal Wing Nut for 40mm shafts.

Atlas® Metal Wing Nut (36mm)

$99.00

Atlas® Metal Wing Nut for 36mm shafts.

Atlas® 40mm Quick Release Nut

$80.00

The Atlas® quick release nut fits 40mm wheel balancer shafts with 3mm thread pitch.

Atlas® 36mm Quick Release Nut

$80.00

The Atlas® quick release nut fits 36mm wheel balancer shafts with 3mm thread pitch.

Wheel Balancer Cone 3 (3.07" - 4.36")

$80.00

Wheel Balancer Cone 3 (3.07" - 4.36") Fits A 40mm Shaft

Wheel Balancer Cone 2 (2.32" - 3.23")

$70.00

Wheel Balancer Cone 2 (2.32" - 3.23") Fits A 40mm Shaft

Wheel Balancer Cone 1 (1.75" - 2.75")

$60.00

Wheel Balancer Cone 1 (1.75" - 2.75") Fits A 40mm Shaft

3"-14" Rim Width Caliper

$49.00

3"-14" Rim Width Caliper

XLT Extension Nut

$29.00

All custom wheels do not mount the same. Some wider custom wheels may require the XLT Extension Nut*

Dead Blow Hammer

$20.00

18 OZ. 10 5/8" Dead Blow Hammer

Lug Hole Measuring Caliper (For Universal Adapter)

$19.00

Lug Hole Measuring Caliper For Atlas® Universal Adapter