Primary Lightweight Vehicle Support Block (VSB-W) - (6 3/4" L x 5 7/8" W x 4" H)

Product Code: #AM-051-08623-WHITE
$20.00
(0)
$20.00
Commercial Vehicle Support Blocks (VSB):



VSB are designed to prevent damage to the underside of most vehicles when raised on a flat metal surface pad lift by supporting the vehicle “above the lift’s metal lifting pad’s surface”. The metal top of a lift runway (usually a scissor type lift) may do damage to the body of many of today’s different body style cars if the vehicle is not “raised and supported” off of the metal runway’s surface.



The VBS blocks are designed to support the vehicle in a raised position. Both VSB models come in various sizes to accommodate the various lifting needs of just about every vehicle.



The VSB-B (High Density Black Polypropylene) and the VSB-W (White Polyethylene) can support an enormous amount of weight and their “soft” surface will not damage the body of the vehicle when properly positioned under the vehicle’s lift points.



Both models of the VSB are lightweight and can be easily positioned so that the “frame...or uni-body...or pinch welds” are not contacting the metal lifting surface of the runway.



The VSB-B (black) blocks are best suited for Mr. Homeowner or light commercial use shops where the lift will not be used (every day) for a wide variety of vehicles. The black VSB-B blocks are not as dense as the VSB-W (white) blocks and are more susceptible to permanent damage from Pinch Weld style lifting points (due to the concentration of weight in one area).



We suggest that you use the thicker block styles for Trucks and SUVs and the thinner block styles for passenger cars and mini-vans. Of course, the blocks may be stacked to offer a greater lift height and several could be placed in a line (perhaps along a pinch-weld) to offer a greater lifting surface.



Remember to make sure that all blocks are positioned at the same height so that the vehicle is “level” when lifted.



Important information to consider:

The VSB-W (white) are made from a more dense material than the VSB-B (black) and are designed for use with heavier vehicles and provide a much longer “work life”. The VSB-W is the correct choice for use in a commercial garage or high volume service center with more than just one employee “operating the lift” and positioning the VSB blocks.
  • 4" Thick
  • 6 3/4" L x 5 7/8" W
  • High Density White Polyethylene
  • Very Lightweight: 14.4 oz. (0.90 lb.) Per Block
  • No reviews available

    Be the first to Write a Review