Atlas® 12ASL 12,000 Lbs. Capacity Commercial Grade Alignment Scissor Lift

Product Code: #ATTD-12ASL-N
$8,495.00
(0)
$8,495.00
Greg Smith Equipment is pleased to introduce the Atlas® 12ASL 12,000 lb alignment scissor lift. This lift has been in production for several years and hundreds of these lifts have been sold throughout the world except for the North America.



Our Asian partner developed this lift in a joint venture with one of the most prestigious Italian lift manufacturers. The combination of the Italian engineering and design coupled with the low cost of the Asian labor has resulted in an alignment lift that is equal to or better than similar big name lift brands costing two and three times as much money.



Atlas® and Greg Smith Equipment are the only authorized distribution facilities in North America.



The Atlas® alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full frame under the scissor lift provides for maximum stability.



All Atlas® alignment scissor lifts can be surface mounted or flush mounted. Each lift comes with approach ramps for the floor mounted application or an optional set of ramps if the customer decides to flush mount the lift. Check the technical specifications to better understand how the extra high lifting height allows the Atlas® 12K alignment scissor to be flush mounted and still offer plenty of room under the runways to properly access the underside of the vehicle.



The extra long 53" long approach ramps make it easy to load low riding vehicles.



Once a vehicle is positioned on the Atlas® alignment scissor lift, the optional Atlas® RJ-6 rolling jack can lift the vehicle off of the runways to perform wheel service. The air powered hydraulic Atlas® RJ-6 rolling jack has telescoping arms that extend over the runways to access lift points. These jacks have screw out extensions or optional stack on truck adapters.



Welded rails on the inside of the runways are standard on all lifts, allowing the customer the option of incorporating the Atlas® RJ-6 rolling jack system on his Atlas® alignment scissor lift.



Quality workmanship, ease of operation, straight forward installation instructions, a durable powder coat finish and the lowest prices in the Industry makes the Atlas® 12ASL 12,000 alignment scissor lift the perfect choice for the demanding and discriminating shop owner.



Worried about bay space? An Atlas Alignment System allows the customer to utilize a minimum amount of space and still be able to align the smallest foreign car all the way up to a one ton dual rear wheel pickup truck.



We have hydraulic oil in stock!



Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.

Click here to view photos of our parts department.





Atlas® 12ASL 12,000 LB Alignment Scissor Lift Specifications
Lifting Capacity12,000 LB
Lifting Height84 1/4" (7' 1/4")
Overall Width86 3/8" (7' 2 3/8")
Overall Length with Approach Ramps250" (20' 10")
Overall Length without Approach Ramps197" (16' 5")
Approach Ramp Length53" (4' 5")
4-Wheel Alignment Wheelbase

Max. 168 in.

Min. 90 in.

2-Wheel Alignment WheelbaseMax. 172 in.

Min. 86 in.
Runway Width23 3/4" (1' 11 3/4")
Lowered Height 11 1/2"
Locking Positions19
Width Between Runways39"
Motor/Electrical Requirement220 volt +/- 5% (209-231volts) single (1) phase. A 30 amp breaker is required.
Oil Requirement3.5 Gallons AW32/AW46
Shipping Weight5000 lbs.
Size:Pages:
Atlas® 12ASL Manual3 MB71View
Important Information!

Read To Avoid Damaging Your Lift
40 KB1View Image
Atlas® 12ASL Flush Mount Pit Dimensions1View Image

No reviews available

Be the first to Write a Review