Atlas® 412 12,000 Lbs. Capacity Commercial Grade 4 Post Lift

Product Code: #ATPK-412
$4,095.00
(0)
$4,095.00
FREIGHT INCLUDED
In-Store Pick Up Discount Available. Please Call For Details.
The Atlas® 412 12,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® lifts offer many exclusive features not found on many other competitor's lifts.



Drive-through off-ramps are available as an option.



The Atlas® 412 (12,000 LB. capacity four post lift) incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 412 is tested to ensure that this lift system will perform flawlessly at its rated capacities. The Atlas® 412 has been manufactured to the same exacting specifications for many years.



The Atlas® 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings".



We have hydraulic oil in stock!



Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.

Click here to view photos of our parts department.





Atlas® 412 Specifications
Capacity 12,000 LB.
Lifting Height74" (6' 2")
Overall Width of Columns (Without Motor)126" (10' 6")
Overall Width of Columns (With Motor)135" (11' 3")
Overall Length with Approach Ramps 230" (19' 2")
Overall Length without Approach Ramps200" (16' 8")
Length Between Columns184 1/4" (15' 4 1/4")
Runway Length186 1/2" (15' 6 1/2")
Runway Width22" (1' 10")
Thickness of Runway 5 1/2"
Width Between Runways44 1/2" (3' 8 1/2")
Width Between Runway Rails42" (3' 6")
Outside Runway to Outside Runway84 3/4" (7' 3/4")
Clearance Under Runways68 1/2" (5' 8 1/2")
Column Dimension7" x 5"
Base of Column10 1/8" x 9"
Clearance Between columns112 1/4" (9' 4 1/4")
Height of Columns82" (6' 10")
Maximum Wheel Base175" (14' 7")
Drive Thru98 1/2" (8' 2 1/2")
Column Thickness of Steel3.5mm
Platform Thickness of Steel5mm
Cross Beam Thickness of Steel6mm
Cable Diameter1/2"
Motor 2 HP 220V +/- 5% (209-231volts) 1 phase.

A 30 amp breaker is required.
Oil Requirement3-5 Gallons AW32/AW46
Shipping Weight 2,400 LBS.
Size:Pages:
Atlas® 412 Manual3.8 MB51View
Squeaks And Tweaks300 KB1View
Optional Hose Line Installation Guide280 KB1View
Atlas® 412 Cylinder Bleeding Procedure

(Do this immediately after installation)
145 KB2View
Atlas® Six Terminal Relay Wiring Guide481 KB1View
Atlas® Four Terminal Relay Wiring Guide493 KB1View

No reviews available

Be the first to Write a Review