Atlas® 9KOH Overhead 9,000 lbs. Capacity 2 Post Lift

Product Code: #XH-9KOHX
The Atlas 9KOH 9,000 lb. Light Duty Two Post Lift is an economy designed clear floor vehicle lift with reliable chain-drive cylinders and automatic arm restraints making this the perfect choice for the “Mr. Homeowner” looking to service cars, SUV’s and light duty trucks.

The Atlas® 9KOH can be adjusted to two different height settings: 11' 6" or 11' 10"

The Atlas® 9KOH is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price.

We test our competitors’ lifts and our Atlas® lifts. GET SERIOUS…GET ATLAS®.

The Atlas® 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.

The Atlas® 9KOH includes: an 8 piece set of solid peg type truck adapters, mounting hardware, a set of sliding arm adapters, and a 220 volt single phase power unit that can be mounted on either side of the lift. (The power unit column must be on the correct side).

The Atlas® 9KOH two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.

Click here to see what other customers think about the Atlas® 9KOH!

We have hydraulic oil in stock!

Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Click here to view photos of our parts department.

Atlas® 9KOH Specifications
Capacity9,000 LB.
Lifting TimeAsk Your Salesperson
Overall Height142" (11' 10") or
138" (11' 6")
Overall Width141" (11' 9") (With Power Unit)
134 ¼" (11' 2 ¼")
Outside Column To Outside Column124 5/8" (10' 4 5/8")
Maximum Lift Height
(Without Adapters)
74" (6' 2")
Maximum Lift Height
(With Adapters)
80 ¼" (6' 8 ¼")
Padded Bar Height136" (11' 4") or
132" (11')
Minimum Arm Height4"
Inside Column109 ¾" (9' 1 ¾")
Column Size7 ¼" x 11 ?"
Drive Thru
Symmetric/Asymmetric Arm Configuration
100" (8' 4")
90 ½" (7' 6 ½")
Base of Lift14 ¼" x 18"
Column Thickness of Steel5mm
Carriage Thickness of Steel6mm
Arms Thickness of Steel6mm
Cable Diameter.375"
Motor/Electrical Requirement220V single (1) phase.
A 30 amp breaker is required.
Oil Requirement3-5 Gallons AW32/AW46
Shipping Weight1,450 LB.
Requires a minimum of 4" of concrete with 3000 psi.

Atlas® 9KOH Manual1.3 MB37View
Atlas® 9KOH Overhead Shut Off Bar
Limit Switch Wiring Guide
2.9 MB1View
Atlas® 9KOH Cylinder Bleeding Procedure
(Do this immediately after installation)
144 KB2View

Learn how to make the lift 'shorter' than the factory's recommended height
Can I Mount The Power Unit On Any Column?

NO…but YES. Most lifts have only one column that can be used to mount the power unit.
This column has the mounting bracket. Make sure that you install that specific column on the side where you want to locate the power unit.

Ratings & Reviews

1 review

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews



just got two lifts and i am very happy