Atlas Kwik Bay 7,000 LB. Mid Rise Lift "Blemished"

Product Code: #ATTD-7K-KWIK-BAY-BL
This product is blemished and can only be picked up at our Georgia location. This product cannot be shipped. Call for an updated "cosmetic blemish" report.

The Atlas Kwik Bay is a free standing 7,000 lb. capacity portable scissor lift. The Atlas Kwik Bay is the perfect lift for body shops and wheel service specialists that need extra lifting height. This portable lift easily raises a 7,000 LB. car or truck to a comfortable working height and does not require the customer to position arms under the lifting points of the car. The vehicle is driven over the scissor ramps and the operator simply positions the heavy duty rubber block assemblies under the correct lifting points. The operation is very quick and the chance for any damage to the underside of the car is minimal.

As with any scissor lift that is completely open (no cross support bar in the front or rear to keep the platforms level), the operator must make sure that the vehicle’s frame is positioned at least 6 inches from the inside of the platform. If too much weight is positioned near the edges of the platform (closer than 6 inches from the inside edges), the platforms may become “pigeon toed” and damage may occur.

We sell Atlas® scissor lift support bars for those “professional customers” who are lifting heavy vehicles with narrow frames. Some “shade tree mechanics” may also use 4 x 4 landscape timbers (in place of Atlas support bars) to obtain the same results of dispersing the narrow frame weight over the entire platform lifting surface.
The unique open middle of the Atlas Kwik Bay allows access to many areas on the underside of the car that are not easily accessible with other portable mid-rise lifts employing a full superstructure.

The dual power cylinders and the solid safety lock bars make the Atlas Kwik Bay one of the most versatile and easy to use scissor mid-rise lifts sold in the USA and Canada.

Each hinge point has a zerk grease fitting to allow maximum lubrication to each joint.

Our Atlas Kwik Bay has been thoroughly tested to meet Industry standards. The Atlas Kwik Bay scissor mid-rise lift is powered by a 110 volt power unit that is mounted on a movable cart. The power unit can be remotely located near the lift for maximum efficiency. This cart is also used to move the Atlas Kwik Bay on a smooth surface. The lift can be rolled to and from an inside work bay to an outside concrete apron work area.

The Atlas Kwik Bay is the ultimate scissor mid-rise lift that includes one set (4) of positioning blocks.

The large “foot print” of the Atlas Kwik Bay creates a steady platform for any raised vehicle. The Atlas Kwik Bay has a lifting height of over 39” and remains rock solid at all safety lock positions.

We have hydraulic oil in stock!
Atlas® Kwik Bay 7,000 LB.
Mid Rise Lift Specifications
Detailed Pictures/Specs.
Capacity7,000 LB.
Maximum Lifting Height41" (With positioning blocks)
Minimum Lifting Height4 ¼"
Overall Dimensions77 ½" (6' 5 ½") L x 72" (6') W
Platform Dimensions57 1/2" (4' 9 1/2") L x 19 ¼" (1' 7 ¼") W
Ramps10 ¼" x 19 ¼"
Between Runways 33 ½" (2' 9 ½")
Air Requirement85-120 psi.
Motor/Electrical Requirement120 volt single (1) phase
A 30 amp breaker is required.
Oil Requirement3.5 Gallons AW32/AW46
Shipping Weight
1,215 LB.
Atlas® Kwik Bay Manual1.1 MB26Download
Important Information!
Read To Avoid Damaging Your Lift
40 KB1View Image
Long Term Vehicle Support Information251 KB2Download

  • 7,000 LB. Capacity
  • One set (4) of positioning blocks
  • Portable
  • Zerk grease fittings at hinge points
  • Open middle for easy access.
  • 110V motor
  • Air operated locks
  • 2 year structural, 2 year hydraulic
    limited warranty

No reviews available

Be the first to Write a Review