Atlas® PV-9HP Overhead 9,000 lb Capacity Adjustable Height
2 Post Lift (EXTRA TALL)

Product Code: #ATPK-PV9PEH
In-Store Pick Up Discount Available. Please Call For Details.
PV = Professional Value

The Atlas® PV series represents the absolute best value for the customer who demands a heavy duty professional grade two post lift at the lowest possible price. Atlas® has been manufacturing the PV series two post above ground lifts for over a decade. Thousands sold! Descriptions such as “bullet-proof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the Atlas® PV series models. GET SERIOUS…GET ATLAS®

The Atlas® PV-9HP is the taller version of the Atlas® PV-9P two post above ground lift. The over head beam (that connects the two columns) is positioned two feet higher than the over head beam on the Atlas® PV-9P. The taller position of the over head beam allows the Atlas® PV-9HP above ground hoist to lift "taller vehicles". The Atlas® PV-9HP is a commercial grade two post lift that incorporates the same arm and carriage design as our Industry leader PV-10P. The PV-9HP has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The PV-9P has dual direct drive cylinders and single point lock release.

The Atlas® PV-9HP is designed and engineered to safely lift (and work on) everything from a Smart Car ® to a one ton dually.

The Atlas® PV-9HP incorporates a "padded" shut-off bar to protect the top of the vehicle from contacting the crossbar. The carriages are equipped with "padded" protective (thick rubber) covers to help prevent the vehicle's doors from damage if opened into the columns or carriages.

We have hydraulic oil in stock!

Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Click here to view photos of our parts department.

Atlas® PV-9HP Specifications
Capacity9,000 LB.
Lifting TimeAsk Your Salesperson
Overall Height166 1/2" (13' 10 1/2")174 1/2" (14' 6 1/2")
Padded Bar Height159 1/2" (13' 3 1/2")167 1/2" (13' 11 1/2")
Overall Width135" (11' 3")135" (11' 3")
Outside Column to Outside Column 125 1/2" (10' 5 1/2")125 1/2" (10' 5 1/2")
Maximum Lift Height
(Without Adapters)
71 1/2" (5' 11 1/2")
Maximum Lift Height
(With Adapters)
80 1/2" (6' 8 1/2")
Minimum Arm Height4 1/2"
Inside Column112 1/4" (9' 4 1/4")112 1/4" (9' 4 1/4")
Column Size6 1/2" x 10 1/2"
Column Thickness of Steel5mm
Carriage Thickness of Steel5mm
Arms Thickness of Steel6mm
Drive Thru
Symmetric/Asymmetric Configuration
99 1/2" (8' 3 1/2") - Symmetric
93" (7' 9") - Asymmetric

Base Of Lift15 5/8" x 17 5/8"
Cable Diameter.375"
3 HP 220V single (1) phase.
A 30 amp breaker is required.

Shipping Weight1,600 LBS.

Requires a minimum of 4" of concrete with 3000 psi.

All lifts come with a step by step instruction manual.

Atlas® PV-9HPX Manual2.8 MB45View
Atlas® PV-9HP Manual3.1 MB44View
Atlas® Overhead Lift Wiring Guide300 KB1View
Atlas® Overhead Lift Wiring Guide (New Style)2.9 MB1View
Wiring Guide for TMC-18 Contactor170 KB1View
Learn how to make the lift 'shorter' than the factory's recommended height
Can I Mount The Power Unit On Any Column?

NO…but YES. Most lifts have only one column that can be used to mount the power unit.
This column has the mounting bracket. Make sure that you install that specific column on the side where you want to locate the power unit.

No reviews available

Be the first to Write a Review