Atlas® Pro-9D Overhead 9,000 lbs. Capacity 2 Post Lift

Product Code: #XH-PRO-9D
$2,295.00
(0)
$2,295.00
FREIGHT INCLUDED
The Atlas® Pro-9D is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price. The Atlas® Pro-9D can be adjusted to two different height settings: 11' 6" or 11' 10".

We test our competitors’ lifts and our Atlas® lifts. GET SERIOUS…GET ATLAS®.

The Atlas® Pro-9D has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.

The Atlas® Pro-9D includes: a complete set of solid peg type truck adapters, mounting hardware, a set of sliding lift point adapters, and a 220 volt single phase power unit that can be mounted on either side of the lift. (The power unit column must be on the correct side).

The Atlas® Pro-9D two post direct drive cylinder lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.

We have hydraulic oil in stock!

Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.
Click here to view photos of our parts department.


Atlas® Pro-9D Specifications
Capacity9,000 LB.
Lifting TimeAsk Your Salesperson
Overall Height142" (11' 10") or 138" (11' 6")
Overall Width140" (11' 8") (With Power Unit)
132" (11') (Without Power Unit)
Outside Column To Outside Column122 1/2" (10' 2 1/2")
Maximum Lift Height
(Without Adapters)
77 5/8" (6' 5 5/8")
Maximum Lift Height
(With Adapters)
82 5/8" (6' 10 5/8")
Padded Bar Height134 1/4" (11' 2 1/4")
Minimum Arm Height4 1/2"
Inside Column110 1/4" (9' 2 1/4")
Column Size7 1/4" x 11"
Drive Thru98" (8' 2") (Symmetric Arm Configuration)
88 3/4" (7' 4 3/4") (Asymmetric Arm Configuration)
Base of Lift14 ½" x 18"
Column Thickness of Steel5mm
Carriage Thickness of Steel6mm
Arms Thickness of Steel6mm
Cable Diameter.375"
Motor/Electrical Requirement220V single (1) phase.
A 30 amp breaker is required.
Oil Requirement3-5 Gallons AW32/AW46
Requires a minimum of 4" of concrete with 3000 psi.
Shipping Weight1450 lbs.

Size:Pages:
Atlas® Pro-9D Manual1.7 MB29View
Atlas® Pro-9D Overhead Shut Off Bar
Limit Switch Wiring Guide
2.9 MB1View

No reviews available

Be the first to Write a Review