Atlas® SLP-9K Commercial Grade 9,000 Lbs. Capacity Full Rise Scissor Lift

Product Code: #ATTD-SLP9K
$5,045.00
(0)
$5,045.00
FREIGHT INCLUDED
In-Store Pick Up Discount Available. Please Call For Details.
Greg Smith Equipment has added another space saving scissor lift to the Atlas® product line. The Atlas® SLP-9K full rise scissor lift combines an extremely low lift platform height and a 78 inch full rise scissor jack system. The Atlas® SLP-9K full rise scissor lift is the perfect above ground lift for those customers with ceiling height restrictions and the need for “enough lift” to raise pick-up trucks. This Atlas® full rise scissor lift is also perfect for those service shops that want to avoid the cluttered look of dozens of vertical lift columns.



The Atlas SLP-9K can also be flush mounted. The flush mounted scissor lift gives the service area a “clean look” and also provides a “flat surface” which can be driven over from any angle, making it easy to position the vehicle over the lifting platforms.



The 31" adjustable distance between the lift platforms of the Atlas® SLP-9K scissor lift can accommodate a full frame, uni-body, or SUV (truck) lifting points.



It is highly recommended that you purchase the Atlas® Scissor Lift Support Bars if the intended use is for lifting heavier vehicles (pickup trucks and SUVs) with narrow frames.



The best way to position any vehicle on a scissor lift (with horizontal cylinders) is to allow some space (2-6 inches) between the lifting surface of the lift and vehicle’s lifting points.



The separate control panel may be conveniently positioned to allow easy access for the operator. The 220 volt (single phase) electric/hydraulic power unit is housed inside the metal control panel box. The push button controls activate the raising and lowering of the lift. The sophisticated 10 position air actuated lock system is automatically engaged and disengaged as the lift is being raised or lowered.



Each hinge point has a zerk grease fitting to allow maximum lubrication to each joint. The UHMP wear blocks ensure years of smooth operation of the lifting surface.



The lift has a safety lowering limit switch. Once the lift platforms are lowered to within 10 ½ inches of the ground, the lift automatically stops its descent. The Down button needs to be released and depressed again to allow the lift to go down completely.



The Atlas® SLP 9K has locking approach ramps (attached to the lifting platforms) that can be locked into a horizontal position after the lift is locked at the desired working height.



We have hydraulic oil in stock!



Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.

Click here to view photos of our parts department.





Atlas® SLP-9K Full Rise Scissor Lift Specifications
Lifting Capacity9,000 lbs.
Max Lifting Height78" (6' 6")
Overall Length82"
Max Overall Width82 ½"
Lift Platform59 ½" x 25 ½"
Lowered Height4 ½"
Width Between PlatformsAdjustable up to 31"
Approach Ramps11" x 24"
Power Unit2 HP 220V +/- 5% (209-231volts) 1 phase.

A 30 amp breaker is required.
Locking Positions10
Locks ActuatedAir
Lifting Cylinders4 (2 In Each Platform)
Oil Requirement3.5 Gallons AW32/AW46
Shipping Weight2,400 lbs.


Size:Pages:

Atlas® SLP-9K Manual2.0 MB57View
Atlas® SLP-9K Parts Catalog515 KB16View
Important Bleeding Procedure Information 67 KB1View Image
Important Information!

Read To Avoid Damaging Your Lift
40 KB1View Image
  • 9,000 LB. capacity
  • 78" (6' 6") maximum lifting height
  • Adjustable width
  • 10 air actuated locking positions
  • 220V single phase motor
  • Open middle for easy access
  • Locking approach ramps
  • Zerk grease fittings at each hinge point
  • Open middle for easy access
  • 1 Year Structural and Hydraulic

    Warranty
  • Separate Self-Contained Control Panel
  • CE Certified
  • Shipping Weight: 2400 lbs

No reviews available

Be the first to Write a Review