Atlas® ST-7000 SUPER TALL 4 Post Lift

Product Code: #XH-PRO7000ST
$5,200.00
(0)
$5,200.00
The Atlas® ST-7000 is the perfect lift for those car enthusiasts lucky enough to have extra tall ceilings and need to store regular height vehicles on top of extra tall vehicles. The Atlas® ST-7000 raises vehicles weighing up to 7,000 lbs. all the way to over 12 feet (144 inches) under the runway.



This super tall four post storage lift uses the same heavy duty runways found on the Atlas® GP-9000. These commercial grade runways have welded jack tracks to accommodate the full line of professional rolling center jacks offered by Greg Smith Equipment. The extra tall lifting height gives customers the space needed to park much taller vehicles under the lifted vehicle. There are 21 locking positions in the lock ladder. The lock ladder may be adjusted during installation so that an almost infinite number of locking heights may be obtained.



A single point release toggle (located next to the power unit) automatically unlocks all four spring loaded pneumatic locks. Compressed air is required to disengage the locks (air supply not included). The emergency slack cable secondary lock system is always “on standby” and will engage automatically if the aircraft cables are compromised or becomes too slack.



We have hydraulic oil in stock!



Greg Smith Equipment stocks a complete inventory of parts for the equipment we sell.

Click here to view photos of our parts department.





Atlas® GP-7000ST Specifications



Capacity7,000 LB
Lifting Height To Top Of Runway147" (12' 3")
Overall Length with Approach Ramps227 ½" (18' 11 ½")
Overall Length without Approach Ramps205 ¼" (17' 1 ¼")
Length Between Columns185" (15' 5")
Overall Width (With Motor)123" (10' 3")
Overall Width (Without Motor)110 ½" (9' 2 ½")
Approach Ramp Length31 ½" (2' 7 ½")
Total Runway Width19"
Runway Length194" (16' 2")
Runway Thickness4 ½"
Width Between Runways45" (3' 9)
Width Between Runway Rails41 ¾" (3' 5 ¾")
Outside Runway to Outside Runway83" (6' 11")
Clearance Under Runways142" (11' 10")
Size of Column7 ½" x 4 ½"
Clearance Between Columns100" (8' 4")
Base of the Column11 ¾" x 13"
Height of Columns162" (13' 6")
Maximum Wheel Base182" (15' 2")
Drive Thru (Outside of tire to outside of tire)82 ½" (6' 10 ½") Adjustable by 7 ½"
Cable Diameter .625" (5/8")
Gauge Of Steel5 Gauge (.2" / 1/5" / 5mm)
Motor220V +/- 5% (209-231volts) 1 phase.

A 30 amp breaker is required.
Oil Requirement6 Gallons AW32/AW46
Shipping Weight2,866 LBS.


Locking Positions

Under Runway

(+/ - 2")
23" (1' 11")
29" (2' 5")
35" (2' 11")
41" (3' 5")
47" (3' 11")
52 ½" (4' 4 ½")
58 ½" (4' 10 ½")
64 ½" (5' 4 ½")
70 ½" (5' 10 ½")
76 ½" (6' 4 ½")
82 ½" (6' 10 ½")
88 ½" (7' 4 ½")
94 ½" (7' 10 ½")
100 ½" (8' 4 ½")
106 ½" (8' 10 ½")
112 ½" (9' 4 ½")
118 ½" (9' 10 ½")
124 ½" (10' 4 ½")
130 ½" (10' 10 ½")
136 ½" (11' 4 ½")
142 ½" (11' 10 ½")
Manuals/Assembly Guides


Size:Pages:

Atlas® ST-7000 Manual2.1 MB47View

No reviews available

Be the first to Write a Review