The Atlas® 3-D camera system (does not require a fixed tower) is easily installed on the alignment lift runways so the size of the bay space needed is determined by the length of the lift (or vehicle on the lift). No more loss of valuable bay space at the front of your alignment lift.

The (OLD SCHOOL) Tower 3-D cameras utilize wheel mounted sensor targets that are flat or one (1) dimensional. This OLD TOWER 3-D camera alignment system needs two cameras along with the forward and backward movement (rolling the vehicle back and forth on the lift) of the wheel mounted flat target sensor to “triangulate” the target sensor’s position in space.

The Atlas® Cyclops (single camera system) uses a (patented) three (3) dimensional sensor target (not flat) that allows a FIXED single camera to establish a triangulated sensor position without moving the vehicle. This is IC3D technology!