Fast And Easy Alignment

Patented FastClamp System

An accurate alignment begins with the wheel clamps mounted correctly to the wheel. If the wheel clamps are not mounted properly, then the accuracy of the sensors is compromised. Precision accuracy is the result of the proper relationship between the reference point, the measuring sensors, and the software data. The patented FastClamp system assures the operator of the most accurate reference possible.

The Fast-Clamp fastens to the wheel by "gripping the tire". There is no need for any type of "roll-back" procedure and zero runout is attained (IMMEDIATELY). Lipless wheels and dual wheel trucks are absolutely "no-problem". The Fast-Clamp system is perfect for rims that are 10" to 24" in size. You get two sets of "tire grabbers" to secure to a wide variety of tire sizes and you receive all the pins needed for special lipped wheels.

The reason the fast clamp is a non runout is that it is so precision made that it induces no artificial runout into the circle. The standard 4-point on most aligner systems when tightened down flexes and creates a large amount of artificial runout that must be compensated for.

Fast And Easy Alignment:

Atlas Edge alignment machines are absolutely the fastest and easiest alignment machines to operate. The FastClamp system means that the operator does not need to perform a "roll back" on the vehicle.

Most other alignment machines require a time consuming "roll-back" operation which delays the operator from obtaining the car’s measurements as quickly as possible. Atlas Edge alignment systems allows the operator to install the sensors and acquire both axle measurements (including Caster and SAI) in less than 3 minutes.

We do not believe that Hunter ®, Accu-Turn ®, Ranger ®, Bosch ®, Snap-On ® or John Bean ® alignment equipment will allow the operator to record (accurately) these important measurements in such a short period of time.

The CCD camera technology is recognized as the Industry standard and the sophisticated software provides the operator with simple, logical procedures resulting in the fastest format to align a vehicle.

The software help screen has hundreds of images and detailed drawings that depict the method of adjustment for each vehicle and other important information. There is also a "spoiler" program for those vehicles with low air dams.


If you upgrade to the Patented FastClamp System, you will not receive both the Standard 4-Point Clamps and the FastClamp system. You will only receive the receive the Patented FastClamp System.